Page Order (Staple) - Canon imagePRESS C1+ Manual

Page Order (Staple)

IMPORTANT
When coating special types of paper, such as heavy paper or transparencies, be sure to
correctly set the paper type, especially if you are using heavy paper. If the type of paper
is not set correctly, it could adversely affect the quality of the image. Moreover, the fixing
unit may become dirty, or the paper could jam, and a service repair may be needed.
1
1
2
1-22
Collating Coated Paper (Finishing)
Load the preprinted paper into a paper source
[Finishing].
If necessary, see the screen shot in step 1 of "Page Order (Collate)," on p. 1-21.
Press [Staple].
If you want to make hole punches, press [Hole Punch].
● If the optional Finisher-AA1 is attached:
❑
Press [Next].
❑
Select the stapling type ([Corner] or [Double])
press [OK].
➞
press
➞
select the stapling position
➞