Step 12- Carriage Assembly; Pattern Perfect Bracket (Optional Accessory) - Bernina Quilting Frame Assembly Instruction Manual

Step 12: Top Plate Carriage Assembly
Parts Needed:
1- Right Handle
1- Left Handle
4- M6 x 35mm SBHCS
2- M6 x 25mm SBHCS
2- M6 x 10mm SBHCS
1- Carriage Top Plate
1- Handle Brace
1- Carriage Bottom Plate
1- Bottom Plate Surface
2- M6 Nylock Nut
Tools Required:
Open Ended Wrench (Provided)
4mm Allen Wrench
12-1: Attach the Right Handle to the Carriage Top Plate
by inserting (2) M6 x 35mm SBHCS through the Handle
and into the Carriage, as shown in Fig. 12-1.
12-2: Insert (1) M6 x 10mm SBHCS through the back
of the Handle and through the Carriage Top Plate.
12-3: Follow Step 12-1 through 12-3 for the Left
Handle.
12-4: Attach the Handle Brace to the Right and Left Handles
by sliding (2) M6 x 25mm SBHCS, through the Handle Brace
then into an M6 Nylock Nut, as shown in Fig. 12-2. Tighten
the screws with the provided 4mm Allen Wrench and the Open
Ended Wrench.
12-5: Place the Bottom Plate onto your quilting frame then
place your top plate on your bottom plate with your handles
facing towards the front of the frame. Adjust the Track
Runners (which were left loose in step 6) so the wheels
line up centered on the track, as shown in Fig 12-3. (Leave
the track runners loose until the Step Placing Your Sewing
Machine.)
Pattern Perfect Bracket
Parts Needed:
1- Pattern Perfect Bracket
2- M6 X 10mm SBHCS
Step 1- Insert (2) M6 X 10mm SBHCS through the Pattern
Perfect Bracket, and into the Carriage Top Plate, as shown in
Fig. P-1.
Note: The Pattern Perfect™ Bracket is provided for installing
the optional Pattern Perfect™ template system.
M6 x 10mm SBHCS
- (optional accessory)
M6 x 35mm SBHCS
M6 x 25mm SBHCS
M6 Nylock
Nut
Bottom Plate
Top Plate
Track Runners
M6 X 10mm
Left Handle
Fig. 12-1
Right Handle
Fig. 12-2
Fig. 12-3
Fig. P-1
SBHCS
Pattern Perfect
Bracket
Pg.11