Connecting The Modem - Alienware Area-51 m5750 User Manual

Modem
Your computer comes with a 56K V.92 internal fax/modem and a phone jack (RJ-11),
which is located on the left side of your computer.
Use a telephone cable to connect the computer to the telephone wall outlet.

Connecting the Modem

1. Plug one end of the phone line into the modem port located on the rear side
of the computer. (For EMI compliance, you need to clip the included EMI
CORE to the phone line.)
2. Plug the other end of the line into the analog phone wall outlet.
Depending on where your computer is used, you may need to change settings in the
modem. A correct setting will allow you to maintain a stable connection in a country
where its telecommunication system may be different to others.
To change the modem setting, do the following:
1. Go to [Start > Settings > Control Panel > Phone and Modem Options]. Go to
Dialing Rules and Edit My Location. In the Country/Region pull-down menu,
select the appropriate country setting. You will see a similar dialog box.
2. Click on the pull-down menu and select the country where it is applicable. Click
on OK to exit.
Alienware Area-51 m5750 Technical Reference