Alfa Network AIP-610H User Manual page 44

HOW To List for all detail control and script
=> HOW TO USE BANDWIDTH CONTROL
NOTE: This control uses QoS with HTB.
Bandwidth control it's done through Traffic Control menu, via web interface or via
/etc/cbu.conf file. You can limit all traffic via Interface control or you can control via IP
and/or MAC basis. Further more, you can create QoS groups and share the group rate among
the members of that group. You can as well, guarantee minimum rate for group member.
Ex:
CASE 1:
You are going to install this equipment for a Wireless ISP client, which has maximum 256
kbit download speed and 128 kbit upload. Go to traffic control menu and enable "Interface
traffic control", with the values:
LAN Output rate: 256 -> LAN control downloads
WAN Output rate: 128 -> WAN control uploads
With interface based traffic control, you can control maximum interface speed, regardless