Advanced Settings; Fragment Threshold; Rts Threshold - Alfa Network AIP-610H User Manual

Advanced Settings

These settings are only for more technically advanced users who have sufficient
knowledge about wireless LAN. These settings should not be changed unless you know
what effect the changes will have on your device. The default setting is optimized for the
normal operation. For specific application, setting configuration will required highly
attention to reach optimistic condition.
Note: Any unreasonable value change to default setting will reduce the throughput of the
device.
Authentication Type
The device supports two Authentication Types "Open system" and "Shared Key". When
you select "Share Key", you need to setup "WEP" key in "Security" page (See the next
section). The default setting is "Auto". The wireless client can associate with the device
by using one of the two types.

Fragment Threshold

The fragmentation threshold determines the size at which packets are fragmented (sent as
several pieces instead of as one block). Use a low setting in areas where communication
is poor or where there is a great deal of radio interference. This function will help you to
improve the network performance.

RTS Threshold