Alfa Network AIP-610H User Manual page 35

PPPoE
When the PPPoE (Point to Point Protocol over Ethernet) WAN Access Type is
selected, you must fill the fields of User Name, Password provided by your ISP.
The IP configuration will be done when the device successfully authenticates
with your ISP.
User Name: The account provided by your ISP Password: The password for your
account. Connect Type: "Continuous " : connect to ISP permanently "Manual" : Manual
connect/disconnect to
ISP "On-Demand" : Automatically connect to ISP when user need to access the Internet.
The number of inactivity minutes to disconnect from ISP. This setting is only available
Idle Time:
when
"Connect on Demand" connection type is selected.
Maximum Transmission Unit, 1412 is the default setting, you may need to change the
MTU Size:
MTU
for optimal performance with your specific ISP.