Block Wlan Relay (Isolate Client); Transmit Power - Alfa Network AIP-610H User Manual

If you use the 802.1x authentication, you need to have the user profile in these
devices for the roaming station.

Block WLAN Relay (Isolate Client)

The device supports isolation function. If you are building a public Wireless Network,
enable this function can provide better security. The device will block packets between
wireless clients (relay). All the wireless clients connected to the device can't see each
other.

Transmit Power

The device supports ten transmission output power levels
400,315,250,200,150,100,63,50,32 and 16mW for CCK (802.11b) mode and seven
transmission output power levels 100,63,32,16,6,3 and 2mW for OFDM (802.11g) mode.
User can adjust the power level to change the coverage of the device. Every wireless
stations located within the coverage of the device also needs to have the high power radio.
Otherwise the wireless stations only can survey the device, but can't establish connection
with device.