Zoom 2812 Owner's Manual page 24

1
If you are installing a first or additional modem and
not replacing an existing one, you need to add a port
using the Ports Control Panel. To do this, open the
Start menu, point to Settings, and click Control
Panel. Double-click the Ports icon. Click Add and
follow the screen prompts. Write down the port and
IRQ numbers. Skip to step 4.
2
If you are replacing a modem, uninstall the existing
modem using the Modems Control Panel. To do this,
open the Start menu, point to Settings, and click
Control Panel. Double-click the Modems icon. Select
the modem to be removed and click Remove. Follow
the screen prompts.
3
Check the COM port configuration in the Ports
Control Panel. Click Settings and Advanced. Write
down the port and IRQ numbers.
4
Set the jumpers on your internal faxmodem as de-
scribed in Appendix D, using the port and IRQ num-
bers from step 1 or step 3.
5
Install the faxmodem as described described in In-
stalling an Internal Card in Your Computer on page
12. When you've finished and restarted your
computer, return to this page.
6
Open the Modems Control Panel again and click Add.
In the Install New Modem dialog box, check Don't
detect my modem; I will select it from a list.
7
In the next dialog box, click Have Disk. Insert the
COMit disk in your floppy drive.
8
Click OK. Windows autodetects the correct files.
Follow the screen prompts and finish the installation.
24 56K Faxmodem Owner's Manual