Day/Night; Dnr - Omron STC-S133 Series Manual

Day/Night

AUTO
DELAY CNT
DAY→NIGHT
NIGHT→DAY
BURST
OFF
ON

DNR

Set the noise reduction settings
MODE
OFF
Y/C
Y
C
Y LEVEL
C LEVEL
STC-S133 Series
Specifications
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
Set the switch delay between Day and Night mode (Default:5)
Set the threshold to switch from Day to Night mode (Default: 90)
Set the threshold to switch from Night to Day mode (Default: 110)
No burst signal
With burst signal
Noise reduction is OFF
Y/C Filter is ON (Default:)
Y Filter is ON, C Filter is OFF
Y Filter is OFF, C Filter is ON
Set the Y filter level (Default: 4)
Set the C filter level (Default:4)
No.16S061-09
51/55