Table of Contents
Advertisement
6.5
The descriptions for the buttons
Read All
Read out all of the camera information in the camera. Please select this button when the camera power is
Turning on every time.
The camera holds the camera settings as the Default: camera settings when reading out the camera setting
First time after run this software.
DSP -> FLASH
Save the camera settings (changed settings) in to the Flash memory on the camera.
All changed camera settings save to the Flash memory at once.
Reset
Reboot the camera and read out the camera settings from the camera.
The camera holds the camera settings as the Default: camera settings after read out the camera settings.
Please use this button to synchronize the camera settings and the camera settings information in the camera
communication software.
STC-S133 Series
Specifications
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
No.16S061-09
21/55
Advertisement
Table of Contents
