Specifications; Electronic Specifications / Mechanical Specifications / Environmental Specifications - Omron STC-S133 Series Manual

4

Specifications

4.1

Electronic specifications / Mechanical specifications / Environmental specifications

Product
Electronic Image sensor
specifications
Video signal format
Active picture elements
Optical size
Cell size
Scanning system
Vertical frequency
Horizontal frequency
Center resolution
Image S/N ratio
Sensitivity
Sync system
Video output format
Camera
functions
Power
Mechanical Dimensions
specifications
Optical filter
Interface
connector
Weight
Environmental Operational temperature
specifications
Storage temperature
Vibration
Shock
RoHS
(*1) Under STC-S133N-CS with FLCL1614-2M (F5.6) lens
STC-S133 Series
Specifications
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
NTSC (SMTPE170M)
4.48 (H) x 1.70 (V) mm
Electronic shutter
Gain
White balance Auto white balance / Manual white balance / Push to set white balance
Image flip Horizontal flip / Vertical flip / Horizontal and vertical flip / Off ( Default: Off )
Gamma
Up to 16 area (Color, area size and position are adjustable) ( Default: Off )
Privacy masking
Color adjustment
Image adjustment
Day/Night
Lens correction
Others Pixel blemish correction, WDR, Defog, Back light compensation, Flicker
correction, High brightness correction, Noise reduction (2D), Negative / Positive
Communication
(Communication baud rate 230,400 bps, 115,200 bps, 57,600 bps, 38,400 bps,
28,800 bps, 19,200 bps, 14,400 bps, 9,600 bps (Default: 115,200 bps))
* All camera functions are configurable by the UART communication
OSD
Input voltage
Consumption
STC-S133N(P)-CS: φ28 x 14.8 (D) mm (excluding the connectors)
STC-S133N(P): 23 (W) x 20 (H) x 8.2 (D) mm (excluding the connectors)
STC-S133N(P)-L: 25 (W) x 22 (H) x 17.6 (D) mm (excluding the connectors)
STC-S133N(P)-LS: 25 (W) x 22 (H) x 14.4 (D) mm (excluding the connectors)
STC-S133N(P)-NF: 22.4 (W) x 19 (H) x 2.72 (D) mm (excluding the connectors)
Power input,
Video output and
UART
communication
OSD control
STC-S133N(P): Approximately 6 g, STC-S133N(P)-L: Approximately 11 g
STC-S133N(P)-NF: Approximately 2 g, STC-S133N(P)-CS: Approximately 10 g
STC-S133N(P)-CS: -20 to +60 deg. C, Other models: -20 to +45 deg. C
20 Hz to 200 Hz to 20 Hz (5 min. / cycle), XYZ 3 directions 30 min. each
Acceleration 38 G, half amplitude 5.7 ms, XYZ 3 directions 3 times each
STC-S133N*
1/3.2" 1.23Mega pixel CMOS (SONY ISX017), Rolling shutter
1280 (H) x 486 (V)
3.5 (H) x 3.5 (V) µm
59.94 Hz
15.734 kHz
600 TV Line (*1)
VBS 1.0Vp-p / 75 Ohm
1/60(1/50) to 1/605,000 seconds ( Default: Auto )
AGC / Fixed gain 0 to 40 dB ( Default: AGC )
(Default: Auto)
Manual / Straight ( Default: Manual )
Hue and saturation are adjustable
Brightness and contrast are adjustable
Available Dual pass filter is built in
Vignetting, distortion and shading correction
image, False color correction
UART communication (UART +3.3V)
Controllable by the remote control or UART communication
+5.6 to +13.2 Vdc
Maximum 0.7W, Typical 0.6W
STC-S133N(P)-CS: φ28 x 14.8 (D) mm (excluding the connectors)
Dual pass filter built in
CN2: BM8B-SRSS-TB (JST)
CN1: BM6B-SRSS-TB (JST)
STC-S133N(P)-LS: Approximately 10 g
-20 to +85 deg. C
RoHS compliance
STC-S133P*
PAL (TIU-R BT.1700)
1211 (H) x 576 (V)
4.23 (H) x 2.01 (V) mm
21 Interlace
50 Hz
15.625 kHz
50 dB
200 Lux
Internal
No.16S061-09
10/55