Factory Settings; H7Cr-A, H7Cr-B, H7Cr-C; H7Cr-S, H7Cr-8, H7Cr-11 - Omron H7CR-A Series Manual

H7CR

FACTORY SETTINGS

The following settings are made at the factory. Be sure to
change any settings before operating the counter. Settings and
display are possible with or without power supplied, although
power supply is required for inputs and outputs to operate.

H7CR-A, H7CR-B, H7CR-C

Model
Present value
Presets
Input modes
Output mode
Output 2 time
Output 1 time
Counting speeds
Min. reset time
Decimal point
Scale factor
Key protection level

H7CR-S, H7CR-8, H7CR-11

Model H7CR-A (Economy type) H7CR-B (Standard type)
Present value 0
Presets 0
Input modes Up
Output mode N
Output 2 time HOLD
Output 1 time —
Counting speeds 30 cps
Min. reset time 20 ms (not adjustable)
Decimal point Not applicable
Scale factor 1.000 (not adjustable)
Key protection level —
H7CR-A (Economy type)
0
0
Up
N
HOLD
—
30 cps
20 ms (not adjustable)
Not applicable
1.000 (not adjustable)
—
0
0
Up
N (hold outputs on preset 1 K
for double preset)
HOLD
HOLD
30 cps
20 ms
Far right (no fractions)
1.000
KP-1
Outputs are not possible with the presets set to zero. The
display and settings are powered by an internal battery so they
are unaffected by external power interruptions.
H7CR-B (Standard type)
0
0
Up
N (hold outputs on preset 1
for double preset)
HOLD
HOLD
30 cps
20 ms
Far right (no fractions)
1.000
KP-1
H7CR-C (+/– Range type)
0
0
Reversible C
(phase difference)
500 ms
500 ms
30 cps
20 ms
Far right (no fractions)
1.000
KP-1
22
H7CR
H7CR-C (+/– Range type)
0
0
Reversible C
(phase difference)
K
500 ms
500 ms
30 cps
20 ms
Far right (no fractions)
1.000
KP-1
H7CR-8, -11 (Socket)
0
0
Up
N
HOLD
—
30 cps
20 ms
Far right (no fractions)
1.000
KP-1 (H7CR-11 only)