Reversible +/– Range Counters; Short Body Counters; Socket-Mount Counters; Accessories - Omron H7CR-A Series Manual

H7CR
REVERSIBLE +/– RANGE COUNTERS
Number of presets
Display type
Input type
Contact output
12 VDC sensor
supply voltage
Transistor output
Contact output
24 VDC sensor
supply voltage
Transistor output
Counter supply voltages

SHORT BODY COUNTERS

Model Economy
Number of presets One
Display type 6-digit, not backlit
Input type No-voltage
Contact output H7CR-SAL
Transistor H7CR-SASL
Counter supply voltage 12 to 24 VDC

SOCKET-MOUNT COUNTERS

Number of presets
Display type
Input type
Contact output
Transistor
Counter supply voltage
* Available with 100 to 240 VAC supply voltage only.

ACCESSORIES

Description
Sockets 11-pin
8-pin
Panel mounting adapter
Protective cover
NEMA 4 cover
Mounting track
End plate
Spacer
* Panel mounting adapter is included with H7CR-A/-B/-C digital counters.
Order separately for use with H7CR-8/-11 counters.
One
6-digit LCD, backlit
No-voltage
H7CR-C
H7CR-CS
H7CR-CG
H7CR-CSG
100 to 240 VAC, 50/60 Hz or 24 VAC/12 to 24 VDC
Standard
One
6-digit, backlit
H7CR-SBL
H7CR-SBSL
One
6-digit LCD, backlit 4-digit LCD, backlit
Power supply reset type
H7CR-8 H7CR-84*
H7CR-8S —
100 to 240 VAC, 50/60 Hz or 24 VAC/12 to 24 VDC
Bottom surface or track mounting, top screw terminals
Bottom surface or track mounting, top screw terminals, finger safe terminal
conforms to VDE0106/P100
Back mounting, for use with Y92F-30 mounting adapter, bottom screw terminals P3GA-11
Bottom surface or track mounting, top screw terminals
Bottom surface or track mounting, top screw terminals, finger safe terminal
conforms to VDE0106/P100
Back mounting, for use with Y92F-30 mounting adapter, bottom screw terminals P3G-08
Terminal cover for P3G sockets, conforms to VDE0106/P100
Fits behind panel, ideal for side-by-side installation. Use P3G-08 sockets
Hard plastic cover protects against dust, dirt and water; not for use with
panel covers
Soft cover with two mounting clips for front panel protection
Shock prevention terminal cover protects wiring connections
Waterproof front cover
DIN rail, 50 cm (1.64 ft) length; 7.3 mm thick
DIN rail, 1 m (3.28 ft) length; 7.3 mm thick
DIN rail, 1 m (3.28 ft) length; 16 mm thick
Two (Non-independent)
6-digit LCD, backlit
Voltage No-voltage
H7CR-CV H7CR-CW
H7CR-CVS H7CR-CWS
H7CR-CVG H7CR-CWG
H7CR-CVSG H7CR-CWSG
Two
4-digit, backlit 6-digit, backlit
H7CR-SB4L —
— H7CR-SBWSL
6-digit LCD, backlit
Memory backup type
H7CR-11
H7CR-11S
2
H7CR
Voltage
H7CR-CWV
H7CR-CWVS
H7CR-CWVG
H7CR-CWVSG
Reversible +/– Range
One Two
6-digit backlit
H7CR-SCL —
H7CR-SCSL H7CR-SCWSL
Part number
P2CF-11
P2CF-11-E
P2CF-08
P2CF-08-E
Y92A-48G
Y92F-30
Y92A-48B
Y92A-48F1
Y92A-48T
Y92A-48N
PFP-50N
PFP-100N
PFP-110N2
PFP-M
PFP-S