Room Unit - Siemens RVD230 Basic Documentation

56/130
Siemens Building Technologies
HVAC Products
• Maximum limitation of the volumetric flow and of power
• D.h.w. time program
• All the other d.h.w. functions
The outside temperature can be acquired for display.
13.8

Room unit

Connection of a room unit to a primary controller does not make much sense because
the majority of the room unit functions cannot be used when there is no heating circuit.
If a QAW70 room unit is connected to the primary controller, it does not display the
setpoints of room heating. By contrast, the temperature of the precontrolled flow ac-
quired by sensor B1 will be displayed.
With plant type 7–2, a room unit is automatically assigned to the heating circuit; the flow
temperature of the heating circuit acquired with sensor B12 will be displayed. Display of
the temperature of the precontrolled flow (sensor B1) with a room unit is not possible.
Basic Documentation RVD230
13 Precontrol
CE1P2383en
27.05.2004