Aiwa CT-X429 Operating Instructions Manual page 10

MY INFORMATION SWITCH
Notes
When you preset two programs, be sure that
they do not overlap.
:MMmw&m$l#@&B#g::""
.,,
&~@:
Even if the unit is in a mode other than Radio
. ~ ~p, . $ ,, W.,$!.%>4,,.4""".,,,,,,,, . .
mode, the unit switches to Radio mode and
You can activate the timer for program 1 and/or
tunes in the preset radio program at the preset
program 2.
time automatically. When the program is over,
the unit returns totheformermode automatically.
BAND CD TAPE
When this function is activated, TUNE Y/A,
A. ME, LO and the preset number buttons do not
work for tuning in stations.
Even if you are listening to a radio program with
this function, pressing the following buttons
switches the unit to other mode:
— Pressing BAND changes the unit to Radio
1
2
3
4
5
2;4 1,3;5
With the unit on, press MY INFO.
The "PRG1 ON or "PRGI OFF indication
(the current setting for program 1) appears.
Press TUNE 7 or TUNE A repeatedly
until the "PRG1 ON" indication flashes.
Press MY INFO.
The "PRG2 ON or "PRG2 OFF indication
(the current setting for program 2) appears.
Press TUNE Y or TUNE A repeatedly
until the "PRG2 ON" indication flashes.
Press MY INFO to activate the timer.
The "MY INFO indicator lights up.
If you do not proceed to the next step within 5
seconds in steps 1 – 4, the display returns to the
current source indication.
To cancelthe timer
To cancel program 1, press TUNE 7 or TUNE
A
repeatedly until the "PRG 10FF" indication flashes
in step 2.
To cancel program 2, press TUNE V or TUNE
A
repeatedly until the "PRG2 OFF indication flashes
in step 4.
mode.
— Pressing TAPE changes the unit to Tape
Play mode.
— Pressing CD changes the unit toCD Changer
Play mode.
If you switch modes with these buttons, the unit
does not turn off at the turn-off time of the timer.
To switch to CD/MD IN mode, press TAPE, CD,
or BAND before connecting a portable CD/MD
player, etc. to the CD/MD IN jack.
9
ENGLISH