Quick Installation Guide USB 2.0 Ethernet Adapter Model # ASOHOUSB Section 1 Installation The following steps and screen shots are for Windows XP only. Please refer to the User’s Manual in the CD for Windows 98/ME/2000. Step 1 Power on your computer and connect the USB 2.0 Ethernet Adapter to your computer’s USB port.
Page 2
Step 6 Verify Search for the best driver in these locations is selected and both check boxes below are checked and click Browse. Step 7 Expand your CD drive, select the WinXP folder and click OK. Step 8 Click Next to install the driver. Step 9 Click Continue Anyway at the Windows Logo prompt.
Right-click on My Computer from your desktop and select Properties. Step 2 Select the Hardware tab and click on Device Manager. Step 3 Expand Network adapters from the list and verify that ASIX ax88772 USB2.0 to Fast Ethernet Adapter is listed and no yellow question mark is beside it.