Related Manuals for Airlink101 ASOHORL
Summary of Contents for Airlink101 ASOHORL
- Page 1 32-bit PCI 10/100Mbps Fast Ethernet Adapter Model # ASOHORL Quick Installation Guide Ver. 1A...
-
Page 2: Fcc Class B Certification
FCC Class B Certification This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. - Page 3 Introduction Thank you for choosing the 32-bit PCI 10/100Mbps Fast Ethernet Adapter, this Adapter auto-configurable upon power up and also supports auto-negotiation automatically select optimum speed and communication mode of an attached device. Additionally, the 32-bit PCI-Bus 10/100Mbps NWay ACPI Fast Ethernet Adapter complies with ACPI, and PC99, and includes support for Remote Wake-Up by Magic Packet™, ®...
- Page 4 Remote LAN Wakeup Remote LAN Wakeup capability is a key feature of a centrally managed PC environment. This technology allows networked PCs to be powered up and managed from a central location at any time. To utilize Remote LAN Wakeup, three elements are required: Desktop management software that can send a “wake-up”...
- Page 5 Product Featues Designed for versatility and performance, the 32-bit PCI bus 10/100Mbps Fast Ethernet Adapter provides the following features: • Compliant to IEEE 802.3, 10BASE-T standard • Complaint to IEEE 802.3u 100BASE-TX standard • Compliant IEEE ANSI/802.3 Auto-negotiation standard • Compliant to PCI 2.1, 2.2 standards •...
-
Page 6: Installation
Installation Installation the 10/100Mbps PCI bus Fast Ethernet Adapter requires Hardware installation first, then BIOS and Software installation. Step 1, Hardware Installation Switch off the computer, unplug the power cord, and remove the computer’s cover. Select an unused PCI slot and remove its protective bracket. - Page 7 Step 2, BIOS Configuration Due to a fault in some Plug-n-Play BIOS programs, it happens occasionally that a newly installed adapter is assigned an Interrupt Number which is already assigned to another device. In such a case, the conflict of Interrupt Number will cause faults in the behavior of both devices.
-
Page 8: Troubleshooting
Insert the Boot ROM into the socket on the Adapter. Refer to the installation procedures provided by the network operating system. Troubleshooting If you experience any problems with the Adapter, first verify that the appropriate driver is loaded, that the proper grade of cable is employed for the network connection, and that the supporting hub is functioning properly. -
Page 9: Technical Support
CMOS Setup utility after you have reinstalled all of the expansion Adapters. Technical Support E-mail: support@airlink101.com Toll Free: 1-888-746-3238 Web Site: www.airlink101.com... - Page 10 AirLink101. All other product or service names are the property of their respective holders. AirLink101 products are protected under numerous U.S. and foreign patents and...