Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Airlink101 Manuals
  4. Adapter
  5. AWLC6070
  6. Quick installation manual

Airlink101 AWLC6070 Quick Installation Manual

150n wireless cardbus adapter
Hide thumbs Also See for AWLC6070:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual See also: User Manual
Enlarged version

Quick Installation Guide

150N Wireless Cardbus Adapter
Model # AWLC6070
Section 1

Install Utility Software

This Quick Installation Guide only provides the basic instructions. For more
advanced features, please refer to the User's Manual on the provided CD.
Step 1
Insert the Cardbus adapter into an available Cardbus slot and turn on your
computer.
Step 2
After turning on the computer, Windows will launch the Found New
Hardware Wizard. The Found New Hardware Wizard appears differently
depending on your operating system. Click Cancel to quit the wizard and insert
the Installation CD into your CD drive.
Rev. 1.2
Package Content:
•
Wireless Cardbus Adapter
•
Driver & Utility CD
•
Quick Installation Guide
Step 3
The Autorun screen will pop up. Select Install Driver and Utility from the
menu.
Note: If the Autorun screen doesn't appear automatically go to Start, Run, and
type D:\Utility\Setup.exe (where D is the letter of your CD drive) and click OK.

Advertisement

loading

Related Manuals for Airlink101 AWLC6070

Summary of Contents for Airlink101 AWLC6070

  • Page 1: Quick Installation Guide

    Quick Installation Guide 150N Wireless Cardbus Adapter Model # AWLC6070 Section 1 Install Utility Software This Quick Installation Guide only provides the basic instructions. For more advanced features, please refer to the User’s Manual on the provided CD. Step 1 Insert the Cardbus adapter into an available Cardbus slot and turn on your computer.
  • Page 2 Windows Vista users: At this point, you may get a warning message like the one below. Make sure that you click Allow to continue with the installation. Step 4 Click Next at the welcome screen. Step 5 Click Next to accept the default destination folder. Step 6 Click Continue Anyway at the Windows Logo Screen.
  • Page 3 For Windows Vista, click the Install this driver software anyway button when the security warning appears. Step 7 Click Yes, I want to restart my computer now and then Finish to restart your computer. Step 8 After the computer is restarted, Windows will ask to connect to Windows Update, select No, not this time and click Next.

  • Page 4: Configuring The Wireless Adapter

    Step 10 Click Continue Anyway at the Windows Logo Screen. (For Windows 2000, click Yes at the Digital Signature Not Found prompt). For Windows Vista, click the Install this driver software anyway button when the security warning appears. Step 11 Click Finish.
  • Page 5 When the new wireless network connection properties window appears, go to the Wireless Networks tab, uncheck the Use Windows to configure my wireless network settings check box and click OK. Step 1 To open the utility, double click on the Wireless Monitor icon in the system tray at the bottom right-hand corner of your screen.

  • Page 6: Technical Support

    When you click on it and click connect, a box will pop up requesting the wireless encryption key for the router. Enter the encryption key into the box and click OK. Step 3 You should now be connected. You should see “Connected” in the top, right hand corner, and there will be a blue circle around the antenna icon next to the network name.