Connecting To The Access Point - Airlink101 AP431W User Manual

WPA-PSK (WiFi Protected Access-Pre Shared Key)
Step 4e WPA-PSK and WPA-2PSK are more secured than WEP and highly
recommended. Select WPA-PSK from the drop-down menu and enter the key value in
the PassPhrase. Click Apply.
Step 5 For best result, place the Access Point at a central location where it is
accessible to all the wireless computers.

6. Connecting to the Access Point

Once you have properly configured the Access Point, your wireless computers should
be able to detect its signal.
Use your wireless network adapter's utility to detect and connect to the Access Point.
You can identify the Access Point by its MAC Address, which is displayed in the BSSID
field of your wireless network adapter's utility.
You can check the Access Point's MAC Address on its bottom label.
If the signal is weak, try reorienting the Access Point's antenna or relocate the Access
Point to a different place.
19