Enter a MAC Address, then the Save button to create a list of PCs that can
communicate with the AP.
Note: Each MAC address should be entered in this format: xxxxxxxxxxxx ("x"
represents the actual characters of the MAC address).
Click Apply to save the changes.
If you want to block specific PCs from communicating with the Access Point, set Access
Control to Reject. Enter a MAC Address, then click the Save button to create a list of
PCs that cannot communicate with the AP.
Note: Each MAC address should be entered in this format: xxxxxxxxxxxx ("x"
represents the actual characters of the MAC address).
Click Apply to save the changes.
35