Airlink101 AP431W User Manual page 23

Super G Mode: Choose from Disable, Super G™ without Turbo or Super G™ with
Dynamic Turbo as the wireless mode that your wireless network is using. Disable
implies using 11b/11g.
SSID: The SSID is the network name shared among all devices in a wireless network. It
must be identical for all devices in the wireless network.
SSID Broadcast: To broadcast the Access Point's SSID, select Enable. When wireless
clients survey the local area for wireless networks to associate with, they will pick up the
SSID broadcast by the Access Point. If you do not want to broadcast the Access Point's
SSID, then select Disable.
Channel: Select the appropriate channel (1 to 11) from the list provided to correspond
with your network settings, All devices in your wireless network must use the same
channel in order to function correctly. Enable Auto Channel Scan allows the Access
Point to automatically scan for a clear channel.
Note: If you enable Auto Channel Scan, then you cannot specify a channel setting.
Transmission Rates: The default setting is Auto. The range is different according to
the Wireless Mode you select.
You can select a range of transmission speeds, or you can keep the default setting-
Auto to have the Access Point automatically uses the fastest possible data rate. Auto-
Fallback will negotiate the best possible connection speed between the Access Point
and a wireless client.
Authentication: Select the proper authentication for the encryption of your network.
Encryption: Choose Enable to select your security type, or the default setting Disable
to connect with better performance. Disabling security setting will make your network
more vulnerable to intrusion.
23