Connecting The Access Point - Airlink101 AP411W Quick Installation Manual

Airlink ap411w: installation guide

Hide thumbs Also See for AP411W:

Section 1

This Quick Installation Guide only provides the basic instructions. For more

detailed information, please refer to the user's manual on the supplied CD.

Connecting the Access Point

Step 1

Connect one end of a network cable to the Ethernet port of the access point and connect the

other end of the cable to the LAN port of a router or switch.

Step 2

Power on the access point by connecting one end of the supplied power adapter to the power

jack of the access point and connecting the other end to an electrical outlet.

Step 3

Make sure the Power and LAN lights on the Access point are lit, and the WLAN light is blinking.

If not, verify the cables are functional and try the above steps again.

Table of Contents