Getting Started with the Base Reference Design
own images. To select one of the provided images, look in the ML605_BRD _Images
directory.
In the Image section of the GUI, use the browse button to navigate to an image. After you
have selected the image, click the Show Display button. This will display two side-by-side
images. The leftmost image is the unaltered image, and the rightmost image is the image
that has been filtered by the FPGA. Unless the effect has been changed, the default effect is
Identity
X-Ref Target - Figure 1-57
58
(Figure
1-57).
Figure 1-57: Original and FPGA Filtered Images using Identity Effect
www.xilinx.com
Virtex-6 Getting Started Guide
UG533 (v1.4) November 15, 2010