Xilinx Virtex-6 FPGA ML605 Getting Started page 19

14. Type a 5 to start the IIC EEPROM test.
X-Ref Target - Figure 1-15
15. Type a 6 to start the Ethernet Loopback (Temac) test. This takes approximately 10
X-Ref Target - Figure 1-16
Virtex-6 Getting Started Guide
UG533 (v1.4) November 15, 2010
Figure 1-15: 5. IIC EEPROM Test
seconds to complete.
Figure 1-16: 6. Temac Test
www.xilinx.com
Getting Started with the Flash Demonstration
19