Xilinx Virtex-6 FPGA ML605 Getting Started page 27

22. Connect a DVI monitor to the ML605 board using the connector shown in
X-Ref Target - Figure 1-25
23. Type a D to start the DVI/VGA (TFT) test. The test patterns indicated in
X-Ref Target - Figure 1-26
Virtex-6 Getting Started Guide
UG533 (v1.4) November 15, 2010
The DVI/VGA adapter provided in the ML605 Evaluation Kit can be used to connect
a VGA monitor.
Figure 1-25: ML605 DVI Connector
appear on the monitor.
Figure 1-26: TFT Test
www.xilinx.com
Getting Started with the Flash Demonstration
Figure 1-25.
Figure 1-26
27