Turn Off The Leds - NETGEAR LM1200 User Manual

To view alerts:
1. Launch a web browser from a device that is connected to the modem.
The device can be a computer that is directly connected to the modem or a client
from a router that is connected to the modem.
2. In the address field of your browser, enter http://192.168.5.1.
The limited Dashboard page displays.
3. Enter the modem password in the Sign In field.
See the modem label for the default password.
4. Click the Sign In button.
The full Dashboard page displays.
Alerts display in the Alerts section at the top of the page.
5. Follow the instructions in each alert to address the conditions that caused it to display.

Turn Off the LEDs

By default, the LEDs on the top panel of the modem are enabled to indicate the status
of the modem and the mobile broadband connection. There might be situations in
which you want to turn off the LEDs.
To turn off the LEDs:
1. Launch a web browser from a device that is connected to the modem.
The device can be a computer that is directly connected to the modem or a client
from a router that is connected to the modem.
2. In the address field of your browser, enter http://192.168.5.1.
The limited Dashboard page displays.
3. Enter the modem password in the Sign In field.
See the modem label for the default password.
4. Click the Sign In button.
The full Dashboard page displays.
5. Select Settings.
The page displays the general settings.
6. In the Device LED section, select the Off radio button.
By default, the On radio button is selected.
Manage the Modem and
Monitor Usage and the Network
NETGEAR 4G LTE Modem LM1200
64 User Manual