Appendix D Reference; Appendix D.1 Specifications; Appendix D.1.1 Compliance With Ul Regulations; Figure 46: Specifications - SMC Networks Lochinvar ProtoNode Startup Manual

Appendix D Reference

Appendix D.1 Specifications

Electrical Connections
Power Requirements
Approvals
Physical Dimensions
Weight
Operating Temperature
Humidity

Appendix D.1.1 Compliance with UL Regulations

For UL compliance, the following instructions must be met when operating ProtoNode.
•
The units shall be powered by listed LPS or Class 2 power supply suited to the expected operating
temperature range.
•
The interconnecting power connector and power cable shall:
o
Comply with local electrical code
o
Be suited to the expected operating temperature range
o
Meet the current and voltage rating for ProtoNode
•
Furthermore, the interconnecting power cable shall:
Be of length not exceeding 3.05m (118.3")
o
o
Be constructed of materials rated VW-1, FT-1 or better
•
If the unit is to be installed in an operating environment with a temperature above 65 °C, it should
be installed in a Restricted Access Area requiring a key or a special tool to gain access.
•
This device must not be connected to a LAN segment with outdoor wiring.
3
Specifications subject to change without notice.
One 3-pin Phoenix connector with: RS-485/RS-232 (Tx+ / Rx- / gnd)
One 3-pin Phoenix connector with: RS-485 (Tx+ / Rx- / gnd)
One 3-pin Phoenix connector with: Power port (+ / - / Frame-gnd)
One Ethernet 10/100 BaseT port
Input Voltage: 9-30VDC or 24VAC
Max Power: 3 Watts
CE and FCC class B & C part 15, UL 60950-1, WEEE compliant,
IC Canada, RoHS3 compliant, DNP 3.0 conformance tested,
REACH compliant
4 x 1.1 x 2.7 in (10.16 x 2.8 x 6.8 cm)
0.4 lbs (0.2 Kg)
-20°C to 70°C (-4°F to158°F)
10-95% RH non-condensing

Figure 46: Specifications

Page 55 of 56
Lochinvar ProtoNode Start-up Guide
3
ProtoNode FPC-N54
Current draw: 24VAC 0.125A
9-30VDC .25A @12VDC