Sharp MX-B467F User Manual page 93

Understanding the printer menus
Menu item
IPv4
Enable DHCP
On*
Off
Set Static IP Address
IP Address
Netmask
Gateway
IPv6
Enable IPv6
On*
Off
Enable DHCPv6
On
Off*
Stateless Address Autoconfiguration
On*
Off
DNS Server Address
Manually Assigned IPv6 Address
Manually Assigned IPv6 Router
Address Prefix
All IPv6 Addresses
All IPv6 Router Addresses
Network Address
UAA
LAA
PCL Smartswitch
On*
Off*
PS Smartswitch
On*
Off*
Job Buffering
On
Off*
Mac Binary PS
Auto*
On
Description
Enable and configure IPv4 settings in the printer.
Enable and configure IPv6 settings in the printer.
View the network addresses.
Set the printer to switch automatically to PCL emulation when a print
job requires it, regardless of the default printer language.
Note: If PCL SmartSwitch is off, then the printer does not examine
incoming data and uses the default printer language specified in
the Setup menu.
Set the printer to switch automatically to PS emulation when a print
job requires it, regardless of the default printer language.
Note: If PS SmartSwitch is off, then the printer does not examine
incoming data and uses the default printer language specified in
the Setup menu.
Temporarily store print jobs in the printer hard disk before printing.
Note: This menu item appears only when a hard disk is installed.
Set the printer to process Macintosh binary PostScript print jobs.
Note: On processes raw binary PostScript print jobs.
93