Life Fitness Synrgy90 Owner's Manual And Assembly Instructions page 23

14. Attach Flag and tighten hardware.
15. Peel backing and apply weight stack label (pounds or kilograms) to weight plates.
16. Confirm weight stack selector pin fully engages all weight plates.
17. Cycle unit to ensure proper working order.
Item
1
2
3
Tighten hardware to 20-25 ft-lb (27-33 Nm).
Item
1 Weight Stack Label - Pounds
1 Weight Stack Label - Kilograms
NOTE: Begin numbering from top.
Item
1
NOTE: Adjust cable if pin does not easily fit.
Page 21 of 48
Description
Synrgy360 Flag
3/8 Washer
Screw, M10 x 1.5, 20mm
Description
Description
Weight Stack Selector Pin
Qty.
1
4
4
Qty.
1
1
Qty.
1