Advertisement
WIRING
2.2 Main circuit terminal
2.2.1 Terminal layout and wiring
FR-CC2-H315 kW to FR-CC2-H630 kW
R1/L11 S1/L21
R/L1
S/L2
Power supply
CAUTION
The power supply cables must be connected to R/L1, S/L2, T/L3. (Phase sequence needs not to be matched.)
When wiring the main circuit conductor tighten a nut from the right side of the conductor. When wiring two wires, place
wires on both sides of the conductor (refer to the drawing). For wiring, use bolts (nuts) provided with the converter unit
When wiring cables to the main circuit conductor (R/L1, S/L2, T/L3) of the converter unit, use the bolts (nuts) for main
circuit wiring, which are provided on the front side of the conductor.
FR-CC2-H315 kW, H355 kW
8
Charge lamp
Jumper
P/+
N/-
T/L3
To inverter
Connect the cables here.
FR-CC2-H400 kW to H630 kW
Connect the cables here.
Advertisement
