Using The Optiview Wireless Network Analyzer; Driver Control Popup - Fluke OptiView Getting Started Manual

®
OptiView
Getting Started Guide

Using the OptiView Wireless Network Analyzer

Driver Control Popup

The Fluke Networks OptiView Wireless Network Analyzer application and the
Fluke Networks InterpretAir WLAN Survey Software application both use the
drivers for the wireless PC card. Only one application can use the drivers at a time.
After you install the Wireless Network Analyzer software, and you do not have
the InterpretAir application installed you will see the following Driver Control
popup when you insert the PC card:
The green radio button next to the Wireless Network Analyzer driver is active
field indicates that the Wireless Network Analyzer application is using the drivers.
You can disable the Show window on application startup and Show window in
response to adapter events checkboxes if you do not wish to see the popup. Press
the Start WNA button to begin the application.
If you have both applications installed, you will see the following Driver Control
popup:
8