Table of Contents
Advertisement
05/2013
Service ............................................................................................................................... 20
1 x signal unit FIL1101-0140
1 x IR remote control
1 x product information
General safety regulations
Attention! Mounting, installation, commissioning and repair of electronic devices have
!
to be carried out only by qualified electricians. Thus, the current standards and instruc-
tions for the installation of door communication systems have to be observed.
When working on systems with a main connection of 230 V alternating voltage, the safety
regulations according to DIN VDE 0100 must be observed.
When installing TCS:BUS systems, the general safety regulations for telecommunication
systems according to VDE 0800 must be observed. Inter alia:
separated conduit of heavy and low current lines,
minimum distance of 10 cm in case of a common conduit,
use of separators between heavy and low current lines within shared cable ducts,
use of standard communication lines, e.g. J-Y (St) Y with a diameter of 0.8 mm,
existing lines (modernisation) with deviating cross-sections can be used in compliance
with the loop resistance.
Installation – protective measures
With suitable measures to protect against lightning, it has to be ensured that a voltage
!
of each 32 V DC is not exceeded at the connections a, b, P, E.
The FIL1101 is a signal unit for the TCS:BUS.
The FIL1101 can be allocated parallel to indoor station(s) (necessary for announcement
function indoor station or central).
Three or more devices connected in parallel must all be supplied by the P-wire
(3-wire operation).
TCS TürControlSysteme AG, TCS Hotline Germany:
FAX: +49 (0) 41 94/ 9 88 129 Mail: hotline@tcsag.de
3
Scope of delivery
Safety instructions
Intended use
Subject to technical changes.
FIL1101 UK 1A
mi
Advertisement
Table of Contents
