Table of Contents
Advertisement
05/2013
Commissioning
1. Remove the battery cover on the back of the IR remote control.
2. Remove the foil strip.
3. Attach the cover.
Change batteries
You need 1 button cell CR2025 (DC3.0 V) for the IR remote control.
4. Remove the battery cover on the back of the IR remote control.
5. Observe the polarity of the battery and the markings in the battery compartment "+/-".
6. Insert the battery.
7. Attach the cover.
Attention!
!
Because the risk of explosion, the button cells must not be recharged!
Do not dispose batteries as ordinary domestic waste!
Batteries must be delivered to a collection point for used batteries.
Avoid water from entering the device!
!
Do not use any abrasive detergents!
Clean the device with a dry or slightly moist cloth.
Remove stronger stains with a mild household cleaner.
short text
IR remote control
The device meets the requirements of the EU Directive 2004/108/EG by complying
to the norms: EN 61000-6-3, EN 61000-6-1. Download declarations on conformity
from www.tcsag.de, downloads, trade information.
TCS TürControlSysteme AG, TCS Hotline Germany:
FAX: +49 (0) 41 94/ 9 88 129 Mail: hotline@tcsag.de
19
IR remote control
Clean signal unit and remote control
Spare parts, accessory
Conformity
article number
E23253
Subject to technical changes.
FIL1101 UK 1A
mi
Advertisement
Table of Contents
