05/2013
Adjust ring tone volume
Initiate program-
ming
Enter
correct value has been
entered
incorrect value has
been entered
Set audio AS-threshold (for call distinction)
Initiate
programming
enter
correct value has been
entered
incorrect value has
been entered
* WE = factory setting
TCS TürControlSysteme AG, TCS Hotline Germany:
FAX: +49 (0) 41 94/ 9 88 129 Mail: hotline@tcsag.de
15
If not yet done
* 5 # volume #
...
volume = number 0 to 7
The selected ring tone sounds with the set
volume,
the red LED is ON for 3 s.
Then the red LED blinks.
The selected ring tone volume is stored.
A negative acknowledgement tone sounds
when pressing the #-key.
The the red LED blinks fast for 3 s,
then blinks again.
If not yet done
* 6 # AS-address #
...
AS-address = 0 to 63
The selected ring tone sounds with the set
volume,
the red LED is ON for 3 s.
Then the red LED blinks.
The audio AS-threshold is stored.
A negative acknowledgement tone sounds
when pressing the #-key.
The the red LED blinks fast for 3 s,
then blinks again.
(WE* = 5)
*
(WE
= 0)
Subject to technical changes.
FIL1101 UK 1A
mi