Pentair COLOR SYNC CONTROLLER Installation Manual page 17

Troubleshooting the Color Sync™ Controller
PROBLEM/ SYMPTOM
FAULT
All Lights are One or some of
not turning on. the lights are not
turning on.
CHECK
Disconnect the lights,
then reconnect them
one by one. Be sure
the problem is not with
the lights.
Color Sync Controller Installation Guide
(Continued)
SOLUTION
If problem is with the lights;
replace faulty light(s). If
problem persists, make
sure the correct transformer
(XFRMR) output 12/13/14
VAC is selected for the load
and cable lengths: Refer to
the Transformer
Installation and Guide. If
problem still persists then
replace Controller.
17