Table of Contents
Advertisement
COLOR SYNC CONTROLLER MOUNTING KIT REPLACEMENT
Install the new gasket: Place the gasket behind the face plate flush
5.
against the back of the face plate as shown below.
6.
Reconnect the three (3) wires to the connector screw terminal as shown
on page 12.
Face plate
3 wire connector
screw terminal
7.
Using the provided grease, lubricate the two screw threads.
8.
Secure the controller in the outlet box with the two front screws.
Screw (x2)
Lubricate
screw threads
Controller Gasket Rear View
Color Sync Controller Installation Guide
15
Gasket
Gasket
Hide quick links:
Advertisement
Table of Contents
