Operators Maintenance - Agilent Technologies OmniBER OTN Series Installation Manual

Installation.book Page 26 Monday, January 12, 2004 1:13 PM
1
Introduction

Operators Maintenance

WA RN ING
CAU TI O N
26
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
No operator serviceable parts inside. Refer servicing to qualified
personnel. To prevent electrical shock, do not remove covers.
Maintenance appropriate for the operator is:
• Cabinet cleaning - clean the cabinet using a dry cloth only.
• Cleaning Optical Connectors
• Cleaning SMA Connectors.
• Ensure ventilating fan cover is clean.
Cleaning Optical Connectors
You should clean the optical connectors at regular intervals
using the following materials:
Description
Compressed Air Can or Blow Brush
Isopropyl Alcohol
Lint-free swab
Do not insert any tool or object into the optical IN or OUT ports of the
instrument as damage to or contamination of the optical fiber may
result.
Agilent Part Number
5080-5400
Installation Manual