Statement Of Compliance - Agilent Technologies OmniBER OTN Series Installation Manual

Installation.book Page 29 Monday, January 12, 2004 1:13 PM

Statement of Compliance

Installation Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
This instrument has been designed and tested in accordance
with IEC Publication 61010-1 (1990) + A1:1992 + A2(1995)
Safety requirements for Electrical Equipment for Measurement,
Control and Laboratory Use, and has been supplied in a safe
condition. The instruction documentation contains information
and warnings which must be followed by the user to ensure safe
operation and to maintain the instrument in a safe condition.
The CE mark shows that the product complies with
all relevant European legal Directives.
This is a symbol of an Industrial Scientific and
ISM 1-A
Medical Group 1 Class A product.
This ISM device complies with Canadian ICES-001.
ICES/NMB-001
Cet appareil ISM est conforme à la norme NMB-001
du Canada.
The CSA mark is a registered trademark of the
Canadian Standards Association.
Australian EMC Regulations
The C-Tick mark is a registered trademark of the
Australian Communications Authority. This
signifies compliance with the Australian EMC
Framework Regulations under the terms of the
Radiocommunications Act of 1992.
1
Introduction
29