Electromagnetic Compatibility; Declaration Of Conformity - Agilent Technologies OmniBER OTN Series Installation Manual

Installation.book Page 30 Monday, January 12, 2004 1:13 PM
1
Introduction

Electromagnetic Compatibility

Declaration of Conformity

30
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Noise Declaration (German)
LpA<70dB
am Arbeitsplatz (operator position)
normaler Betrieb (normal position)
nach DIN 45635 pt.19 (per ISO 7779)
This product conforms with the protection requirements of
European Council Directive 89/336/EEC for Electromagnetic
Compatibility (EMC).
The conformity assessment requirements have been met using
the Technical Construction File route to compliance, using EMC
test specifications EN 55011:1991 (Group 1, Class A) and EN
50082-1:1992.
In order to preserve the EMC performance of the product, any
cable which becomes worn or damaged must be replaced with
the same type and specification
If this instrument is subjected to ESD discharges whilst
performing measurements occasional bit errors may be
recorded.
A Declaration of Conformity is provided on the CD-ROM
shipped with your instrument.
Installation Manual