Table of Contents
Advertisement
This parameter lets you specify the type of hard disk installed in your
system. If you want BIOS to automatically configure your hard disk,
select
Auto
.
If you know your hard disk type, you can enter the
setting manually.
Setting this parameter also sets the Cylinder, Head, Sector, and Size
parameters.
Cylinder
This parameter specifies the number of cylinders of your hard disk,
and is automatically set depending on your Type parameter setting.
Heads
This parameter specifies the number of heads of your hard disk, and is
automatically set depending on your Type parameter setting.
Sectors
This parameter specifies the number of sectors of your hard disk, and
is automatically set depending on your Type parameter setting.
Size
This parameter specifies the size of your hard disk, in MB.
Enhanced IDE Features
Hard Disk Size > 504 MB
When set to
Auto
, the BIOS utility automatically detects if the installed
hard disk supports the function. If supported, it allows you to use a
hard disk with a capacity of more than 504 MB. This is made possible
through the Logical Block Address (LBA) mode translation. However,
this enhanced IDE feature works only under DOS, Windows 3.x,
Windows 95, and Windows NT 3.5 and above.
Other operating
systems require this parameter to be set to
Disabled
.
BIOS Utility
3-13
Advertisement
Table of Contents
