Software Error Messages; System Error Messages - Acer 500 System Manual

Acer altos 500 server: system guide
Hide thumbs Also See for 500:
Table of Contents

Advertisement

System

Software Error Messages

Software error messages are returned by your operating system or
application.
These messages typically occur after you boot the
operating system or when you run your application. If you receive this
type of message, consult your application or operating system manual
for help.

System Error Messages

A system error message indicates a problem with the computer itself.
A message of this type normally appears during the power-on self-test,
before the operating system prompt appears.
Message
CMOS Battery Error
CMOS Checksum Error
CPU BIOS Update Code
Mismatch
Diskette Drive Controller Error
or Not Installed
Diskette Drive Error
Diskette Drive A Type
Mismatch
Diskette Drive B Type
Mismatch
Equipment Configuration Error
Hard Disk Controller Error
BIOS Utility
Action
Replace the battery or contact
your dealer.
Run Setup.
Contact your dealer.
Check and connect the control
cable to the diskette controller.
Check the CMOS settings in
Setup and the diskette drive cable
connections.
Run Setup and select the proper
drive type.
Run Setup and select the proper
drive type.
Modify DRAM configuration to
agree with one of the options in
chapter 2, Memory
Configurations.
Run Setup.
2-21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Altos 500

Table of Contents