Table of Contents
Advertisement
Chapter 3 BIOS Utility
Most systems are already configured by the manufacturer or the
dealer. There is no need to run Setup when starting the computer
unless you get a Run Setup message.
The Setup program loads configuration values into the battery-backed
nonvolatile memory called CMOS RAM. This memory area is not part
of the system RAM.
If
you
messages, the battery may be bad.
case, the system cannot retain configuration
values in CMOS. Ask a qualified technician for
assistance.
Before you run Setup, make sure that you have saved all open files.
The system reboots immediately after you exit Setup.
BIOS Utility
repeatedly
receive
Run
Setup
In this
3-1
Advertisement
Table of Contents
