Disk Drives
Select Disk Drives to input configuration values for disk drives.
The following screen shows the Disk Drives menu:
Diskette Drive A ....................... [xx-MB, xx-inch]
Diskette Drive B ....................... [
LS-120 Drive as ........................ [ Normal ]
IDE Primary Channel Master
IDE Primary Channel Slave
IDE Secondary Channel Master
IDE Secondary Channel Slave
Floppy Drives
To enter the configuration value for the first floppy drive (drive A),
highlight the Floppy Drive A parameter. Press
the options and select the appropriate value.
Possible settings for the Floppy Drive parameters are:
[
None
[360 KB,
5.25-inch]
[1.2 MB,
5.25-inch]
[720 KB,
3.5-inch]
[1.44 MB,
3.5-inch]
[2.88 MB,
3.5-inch]
Follow the same procedure to configure floppy drive B. Choose
if you do not have a second floppy drive.
3-10
Disk Drives
None
or
]
Altos 500 System Guide
]
key to view
None