Table of Contents
Advertisement
Memory Upgrade
The three 168-pin sockets onboard supports SDRAM-type DIMMs
only. You may install 16-MB, 32-MB, 64-MB, or 128-MB DIMMs for a
maximum 384-MB system memory.
The SDRAM DIMMs should work under 3.3 volts; 5-volt memory
devices are not supported. Memory modules with a timing setting of
66 MHz are defined under unbuffered DIMM specifications, while 100
MHz modules are defined under Intel PC-100 SDRAM specifications.
Do not use both 66 MHz (unbuffered) and
100 MHz (registered) SDRAM together. This
might cause your system to malfunction.
Each of the sockets represents one independent bank. This allows
you to install DIMMs with different capacities to form a configuration.
Memory Configurations
Bank 0
Bank 1
16 MB
16 MB
16 MB
16 MB
16 MB
32 MB
32 MB
32 MB
32 MB
32 MB
64 MB
64 MB
64 MB
64 MB
64 MB
128 MB
128 MB
128 MB
128 MB
128 MB
BIOS Utility
Bank 2
Total Memory
16 MB
32 MB
16 MB
48 MB
32 MB
64 MB
32 MB
96 MB
64 MB
128 MB
64 MB
192 MB
128 MB
256 MB
128 MB
384 MB
2-15
Advertisement
Table of Contents
