Safety Instructions; Personnel; Explanation Of Signal Words And The Safety Alert Symbol - Bosch Rexroth MAD Operating Instruction

DOK-MOTOR*-IDYN*A*EXPD-IB05-EN-P
Rexroth MAD and MAF Motors in EX px d Design acc. to ATEX Directive 2014/34/EU
2

Safety instructions

2.1

Personnel

2.2

Explanation of signal words and the Safety alert symbol

The persons responsible for the safety of persons involved in the work or af‐
fected by it must act in accordance with the national legislation.
All persons working on, with or in the vicinity of an electrical system must be
informed of the relevant safety requirements, safety guidelines and internal
instructions (source: EN 50110-1:2004).
Taking the correspondent national regulations into account, ATEX motors
may be commissioned only by a skilled and competent electrician for explo‐
sion-protection.
The Safety Instructions in the available application documentation contain
specific signal words (DANGER, WARNING, CAUTION or NOTICE) and,
where required, a safety alert symbol (in accordance with ANSI
Z535.6-2011).
The signal word is meant to draw the reader's attention to the safety instruc‐
tion and identifies the hazard severity.
The safety alert symbol (a triangle with an exclamation point), which pre‐
cedes the signal words DANGER, WARNING and CAUTION, is used to alert
the reader to personal injury hazards.
DANGER
In case of non-compliance with this safety instruction, death or serious injury
will occur.
WARNING
In case of non-compliance with this safety instruction, death or serious injury
could occur.
CAUTION
In case of non-compliance with this safety instruction, minor or moderate in‐
jury could occur.
NOTICE
In case of non-compliance with this safety instruction, property damage could
occur.
Bosch Rexroth AG 15/69
Safety instructions