Writing Of Venus Cpu - Sony BRC-Z700 Service Manual

2. Turn on the power of this unit.
3. Start CPU writing software using PC.
4. Open the workspace "BRC-Z700SYSTEMCPU".
5. Select "Device" → "Connect to Device" from a menu bar.
Connected to this unit.
6. Select "File" → "Open" from a menu bar.
A file selection screen is displayed.
7. Select a write file.
File name: xxxx.mot
8. Select "Device" → "Download xxxx.mot" from a menu bar.
Writing operation is started.
9. Select "Device" → "Disconnect" from a menu bar.
Connection with this unit is disconnected.
10. Turn off the power of this unit.

3-3-2. Writing of VENUS CPU

Creating the workspace
n
The workspace creating is required only first time.
1. Start the CPU writing software by PC.
2. Select "Create a new project workspace", then click the [OK] button.
3. Enter "BRC-Z700VENUSCPU" in Workspace Name box.
3-10
BRC-Z700