Table of Contents
Advertisement
D-Link DAP-2622 User Manual
The Captive Portal is a built-in web authentication server. When a station connects to an AP, the web browser will be redirected to a web authentication
page. In this window, user can view and configure the Captive Portal settings. After selecting LDAP as the authentication type, we can configure
the LDAP authentication that will be applied to each wireless client in this network.
Session timeout
Enter the session timeout value here. This value can be
(1-1440):
from 1 to 1440 minutes. By default, this value is 60 minutes.
Select 2.4GHz or 5GHz.
Band:
SSID Index:
Select the SSID for this authentication.
Authentication Type:
Select the captive portal encryption type here.
Options to choose from are Web Redirection, Username/
Password, Passcode, Remote RADIUS, LDAP and POP3.
In this section we'll discuss the LDAP option.
Web Redirection State:
Select Enable to enable the website redirection feature.
URL Path:
Select whether to use either HTTP or HTTPS here. After
selecting either http:// or https://, enter the URL of the
website that will be used in the space provided.
IPIF Status:
Select to Enable or Disable the Captive Portal with its IP
interface feature here.
VLAN Group:
Enter the VLAN Group ID here.
Get IP From:
Static IP (Manual) is chosen here. Choose this option if
you do not have a DHCP server in your network, or if you
wish to assign a static IP address to the DAP-2622. When
Dynamic IP (DHCP) is selected, the other fields here will
be grayed out. Please allow about 2 minutes for the DHCP
client to be functional once this selection is made.
Authentication Settings - LDAP
50
Advertisement
Table of Contents
