Page 1
Building Networks for People Quick Installation Guide Wireless AC1200 Wave 2 Dual-Band Wall-Plate PoE Access Point This document will guide you through the basic installation process for your new access point. DAP-2620 Documentation also available via the D-Link Website...
Before You Begin Status Description This installation guide provides instructions Indicates that for installing the DAP-2620 on your network. Solid the access point Additional documentation is also available on green is working Power/ the D-Link support website. correctly Status •...
Use a standard Ethernet cable to connect the the same subnet as the DAP-2620. LAN port on the DAP-2620 to a PoE power source Use an Ethernet cable to connect the device such as a PoE switch or PoE injector.
6 to 15 seconds then release to reset the device to its factory default settings. Additional Information For additional support, please refer to the user manual, or visit your local D-Link support website. Figure 6: Connecting the Cables Attach the DAP-2620 to the mounting...
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 6
Product and Warranty Information To find out more about D-Link products or marketing information, please visit the website http:// www.dlink.com. The D-Link Limited Lifetime Warranty information is available at http://warranty.dlink.com/ 位置: 中文使用說明書 電池使用安全說明 低功率警語: • 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更 頻率、 加大功率或變更原設計之特性及功能。 • 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應...