Table of Contents
Advertisement
Web User Interface
After selecting LDAP as the Authentication Type, we can configure the LDAP authentication that will be applied to each wireless client in this network.
Session
Enter the session timeout value here. This value can
timeout(1-1440) :
be from 1 to 1440 minutes. By default, this value is
60 minutes.
Band :
Select 2.4GHz or 5GHz.
SSID Index :
Select the SSID for this Authentication.
Authentication Type :
Select the captive portal encryption type here.
Options to choose from are Web Redirection,
Username/Password, Passcode, Remote RADIUS,
LDAP and POP3. In this section we'll discuss the LDAP
option.
Web Redirection State :
Default is Disable or select Enable to enable the
website redirection feature.
URL Path :
Select whether to use either HTTP or HTTPS here.
After selecting either http:// or https://, enter the URL
of the website that will be used in the space provided.
IPIF Status :
Select to Enable or Disable the Captive Portal with
its IP interface feature here.
VLAN Group :
Enter the VLAN Group ID here.
Get IP From :
Static IP (Manual) is chosen here. Choose this option
if you do not have a DHCP server in your network,
or if you wish to assign a static IP address to the
DIS-3650AP. When Dynamic IP (DHCP) is selected,
the other fields here will be grayed out. Please allow
about 2 minutes for the DHCP client to be functional
once this selection is made.
IP Address :
Assign a static IP address that is within the IP address
range of your network.
Authentication Settings- LDAP
61
Advertisement
Table of Contents
