Lan - D-Link Nuclias Connect DAP-2622 User Manual

D-Link DAP-2622 User Manual
LAN is short for Local Area Network. This is your internal network. These are the IP settings of the LAN interface for the DAP-2622. These settings
may be referred to as private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and
cannot be seen on the Internet.
Get IP From: Click the drop-down menu to select IP address
setting mode.
Static IP (Manual): Select this setting to
assign a static IP address to the device.
Dynamic IP (DHCP): Select this setting to
obtain an IP address from a DHCP server on
the network.
IP Address: Enter the IP address to assign a static IP address.
Subnet Mask: Enter the subnet mask. All devices in the network must
share the same subnet mask.
Default Gateway:
Enter the IP address of the gateway/router in your
network.
DNS: Enter a DNS server IP address. This is usually the local IP
address of your gateway/router.

LAN

23